#!/bin/sh

### Script para carga do Sample Player ###

# Carga de drivers
/sbin/insmod /lib/modules/olo_memory_layout.ko
mem_maj=`grep "olo_memory_layout$" /proc/devices | cut -b1,2,3`
/bin/mknod /dev/olo_memory_layout c $mem_maj 0
/bin/olo_memory_layout_config_reader
 
/sbin/insmod /lib/modules/pal_linux.ko
/sbin/insmod /lib/modules/sven_driver.ko dismask=0xFFFFFFFF
/sbin/insmod /lib/modules/osal_linux.ko osal_debug=0

# Load IDL drivers
/sbin/insmod /lib/modules/idl_i2c.ko
/sbin/insmod /lib/modules/idl_gpio.ko
/sbin/insmod /lib/modules/idl_spi.ko
/sbin/insmod /lib/modules/idl_smartcard.ko

# RTC must be read before loading the GDL
/bin/rm -f /dev/i2c
i2c_maj=`grep "i2c$" /proc/devices | cut -b1,2,3`
/bin/mknod /dev/i2c c $i2c_maj 0
 
/bin/rm -f /dev/gpio
gpio_maj=`grep "gpio$" /proc/devices | cut -b1,2,3`
/bin/mknod /dev/gpio c $gpio_maj 0

/bin/read_edl_rtc

#Load SMD Drivers
/sbin/insmod /lib/modules/auddac_linux.ko
/sbin/insmod /lib/modules/intel_smd.ko

/sbin/insmod /lib/modules/apm_driver.ko
/sbin/insmod /lib/modules/tsd_driver.ko
/sbin/insmod /lib/modules/tsi_driver.ko
/sbin/insmod /lib/modules/pvr_mm.ko
    
# Inserting minimal module for userspace gdl
/sbin/insmod /lib/modules/gdl_mm.ko

# Cria device nodes
/etc/init.d/rcS-mknods

# gdl_tvoutmode -- TV output mode:
#    0=NTSC          4=PAL/N          8=576P
#    1=NTSC/J        5=PAL            9=1080I/60Hz
#    2=NTSC/443      6=480P          10=1080I/50Hz
#    3=PAL/M         7=720P/60Hz     11=720P/50Hz
#    TVMODE=0
#    TVMODE=7
    TVMODE=0

# pd_tvouttype -- Active output DACs when internal TV encoder is active:
#   0=Composite 1=S-Video 2=Component 3=Combo (Composite + S-Video)
    TVOUTTYPE=0

/bin/gdl_server gdl_tvoutmode=$TVMODE #gdl_canvas_color=123456

# Load display port drivers.
/bin/load_pd /lib/pd_inttvenc.so pd_tvouttype=$TVOUTTYPE
/bin/load_pd /lib/pd_sii9030.so

# -----------------------------------------------------------------------------
# END DISPLAY DRIVER ----------------------------------------------------------
# -----------------------------------------------------------------------------

# Load the MPEG-2 video driver
/sbin/insmod /lib/modules/mpg2vd_drv.ko

# Load the H264 video driver
/sbin/insmod /lib/modules/h264_drv.ko

# Load the VTC
/sbin/insmod /lib/modules/vtc_driver.ko

# Configure the DAC
/bin/audio_route 0 i2s 2 1
/bin/dac_init 48000
/bin/hdmi_audio_app

umount /home

while [ true ]
do
	/mnt/sample_player -d /mnt/underwater_720p_8mbs_h264_nd.ts
done